📊 Verified Performance Data

Numbers That
Speak for
Themselves.

Every Glomet Corp installation is verified by independent lab reports and field measurements. We don't just promise results — we document them.

✓ CPCB Compliant ✓ MPCB Certified ✓ Lab Verified
View Case Studies Request Assessment
TREATMENT PERFORMANCE REPORT LIVE
BOD Removal 98%
Biochemical Oxygen Demand · Target <10 mg/L ✓
COD Removal 97%
Chemical Oxygen Demand · MPCB Norm Exceeded ✓
TSS Removal 99%
Total Suspended Solids · Near-Zero Achieved ✓
Energy Reduction 60%
vs. Conventional Aeration Systems
Sludge Reduction 80%
Lower disposal volume & cost
Source: Field & Lab Reports · Maharashtra Installations ALL PARAMETERS WITHIN NORM
98% BOD Removal
60% Chemical Cost Saved
3× Faster Treatment
40+ Projects Delivered
Treatment Performance

Results Verified.
Every Parameter.

Independent field measurements and lab reports from active Glomet Corp installations across Maharashtra — consistently exceeding statutory norms.

Biological
0%
BOD Removal
Biochemical Oxygen Demand reduced to below 10 mg/L — exceeding CPCB Class B norms.
Conventional: 70–80% → Glomet: 98%
Chemical
0%
COD Removal
Chemical Oxygen Demand consistently reduced — meeting stringent MPCB discharge standards.
Conventional: 60–75% → Glomet: 97%
Physical
0%
TSS Removal
Total Suspended Solids virtually eliminated — achieving near-zero turbidity in treated effluent.
Conventional: 80–90% → Glomet: 99%
Energy
0%
Energy Reduction
Up to 60% lower power consumption vs conventional aeration — reducing long-term operational costs.
Conventional: 3–5 kWh/m³ → Glomet: 1.2–2 kWh
Speed
0×
Faster Treatment
Cycle time reduced from 12–24 hours to 4–8 hours — tripling throughput without plant expansion.
Conventional: 12–24 hrs → Glomet: 4–8 hrs
Sludge
0%
Sludge Reduction
80% less sludge generated — dramatically cutting disposal frequency, handling cost and landfill burden.
Conventional: High volume → Glomet: 80% Less
* All figures represent field-measured averages across active Maharashtra installations. Results vary by influent quality and system configuration. Lab reports available on request.
Before & After

The Transformation
Every Site Sees.

From overloaded, non-compliant effluent to clean, reusable treated water — documented across every Glomet Corp installation.

BEFORE INSTALLATION
High BOD Load
Failing CPCB Norms
High OpEx Cost

Conventional ETP / STP — overloaded system, high chemical dosing, non-compliant discharge, excessive sludge, heavy odour.

VS
AFTER GLOMET INSTALLATION
98% BOD Removed
Exceeded CPCB Norms
60% Less OpEx Cost

Glomet Nanobubble System — compliant effluent, minimal chemicals, reduced sludge, near-zero odour, water reuse ready.

Parameter
Conventional ETP / STP
Glomet Nanobubble
Improvement
BOD Removal
70 – 80%
95 – 98%
+18 – 28%
COD Removal
60 – 75%
94 – 97%
+22 – 34%
TSS Removal
80 – 90%
97 – 99%
+9 – 19%
Treatment Cycle Time
12 – 24 hours
4 – 8 hours
3× Faster
Energy Consumption
3 – 5 kWh/m³
1.2 – 2 kWh/m³
60% Less
Chemical Dosing
High — daily dosing
Minimal / Zero
60% Reduction
Sludge Generation
High volume
80% Reduced
80% Less
Odour / Nuisance
Significant
Near Eliminated
~90% Reduced
Water Reuse Potential
Low
High — ZLD Capable
Significant
Regulatory Compliance
Often marginal / failing
Consistently exceeded
Full Compliance
Case Studies

Projects Delivered.
Results Documented.

Real installations across Maharashtra — each with verified field data, lab reports and measurable outcomes across industry sectors.

Textile / CETP
500 KLD
Maharashtra Industrial Zone

Common Effluent Treatment Plant — Textile Cluster

High TDS, colour load and COD from a multi-unit textile cluster. Conventional ETP was failing MPCB norms. Glomet installed a nanobubble-enhanced system achieving full compliance within 30 days.

96% COD Reduction
70% Colour Removal
55% OpEx Saving
MPCB Compliant Project: 2024
Pharmaceutical
250 KLD
API Manufacturing Facility, Pune Region

Pharmaceutical Effluent Treatment — ZLD Grade

Complex organic pharmaceutical waste with recalcitrant compounds. Nanobubble oxidation combined with biological polishing achieved ZLD-grade output — treated water reused in cooling towers.

98% BOD Removal
ZLD Zero Liquid Discharge
65% Water Recycled
CPCB Compliant Project: 2024
Municipal STP
2 MLD
Municipal Corporation, Western Maharashtra

Sewage Treatment Plant Upgrade — Retrofit Solution

Ageing STP failing NMCG standards. Glomet's retrofit nanobubble aeration unit doubled biological efficiency without full plant replacement — saving significant capital expenditure.

3× Faster Treatment
60% Energy Saved
99% NMCG Compliant
NMCG Compliant Project: 2023
Aquaculture
5 Acres
Fish Farm, Konkan Coast

Intensive Aquaculture Oxygenation System

Dissolved oxygen depletion was causing high fish mortality. Glomet's nanobubble oxygenation maintained optimal DO levels 24/7 — dramatically improving survival rates and yield output.

40% Yield Increase
90% Mortality Drop
18mg/L DO Maintained
System Active Project: 2024
Food & Dairy
300 KLD
Dairy Processing Plant, Nashik District

Dairy Effluent Treatment — High FOG Load

High fats, oils and grease with elevated BOD from milk processing. Glomet's DAF + nanobubble oxygenation combination delivered complete treatment with drastically reduced sludge output.

97% FOG Removal
95% BOD Removal
50% Sludge Reduced
FSSAI Compliant Project: 2024
Hospital / Healthcare
50 KLD
150-Bed Hospital, Pune

Hospital Wastewater — Compact Treatment System

Pathogenic wastewater with pharmaceutical residues and high biological load. Glomet's compact modular system achieved Class A effluent — meeting all CPCB healthcare discharge norms.

99.9% Pathogen Kill
98% BOD Removal
Class A Effluent Grade
CPCB Compliant Project: 2023

Have a wastewater challenge at your facility?

Request a Site Assessment
Scroll to Top